Modeling And Designing Simulation Using CFD Computational Fluid Dynamics Application For The Process Of Capture Diesel Soot Particles By Hydro Cyclone

  • Mai Hanna Shahda Department of Civil Engineering, Al-Baath University, Syria
  • Mahmod Alfattamah Department of Environmental Engineering, Al-Baath University, Syria
  • Youssef Johar Department of Petroleum Engineering, Al-Baath University, Syria
DOI: https://doi.org/10.33261/jaaru.2019.26.3.012
Keywords: Soot particles, Hydro Cyclone, SOLIDWORKS Flow Simulation Programe, CFD

Abstract

The research aims to predict the efficiency of capturing the soot particles generated by the diesel generator within the Hydro Cyclone by conducting the applied study using the Computational Fluid Dynamics (CFD) application through modeling and simulation of the turbulent flow within the Hydro Cyclone using SOLIDWORKS Flow Simulation. The ability to predict the impact of such flows on your product performance is time consuming and costly without some form of simulation tools...SOLIDWORKS Flow Simulation uses Computational Fluid Dynamics (CFD) analysis to enable quick, efficient simulation of fluid flow and can easily calculate fluid forces and help the designer to understand the impact of a liquid or gas on product performance and comparing the results with experimental reality. In this research, the engineering simulation confirmed the importance of using Hydro Cyclone in the capture of diesel soot particles by an error rate of only 4% compared to experimental reality.

Published
2019-08-31
How to Cite
Shahda, M., Alfattamah, M., & Johar, Y. (2019). Modeling And Designing Simulation Using CFD Computational Fluid Dynamics Application For The Process Of Capture Diesel Soot Particles By Hydro Cyclone. Association of Arab Universities Journal of Engineering Sciences, 26(3), 105-111. https://doi.org/10.33261/jaaru.2019.26.3.012
Issue
Vol 26 No 3 (2019)
Section
Articles
Copyright (c) 2019 Mai Hanna Shahda, Mahmod Alfattamah, and Youssef Johar